Frequently asked questions

Short answers on product selection, comparing quotations and preparing an order.

7 questions

Product selection

Are double-sided dimpled drainage sheets better?

Dimples on both sides do not by themselves mean that a drainage sheet stores more water, provides better drainage or is stronger. Different dimple designs can perform the same basic functions. Selection should be based on technical properties and the intended application.

SNTGREEN drainage and water storage sheets retain water in their cups while allowing excess water to move through the voids below the sheet towards the roof outlets.

For paths and paved areas, SNTDRAIN FLOW products can be assessed against the applied loads and drainage requirements. Each area therefore uses a product suited to its purpose.

Product selection should be based on water storage capacity, drainage capacity under load and compressive strength rather than the appearance of the dimples. Roll or board format should be considered together with handling, laying and joint details.

Explore FLOW for hard landscaping
How should I choose between RESERVE 20 and RESERVE 25?

RESERVE 20 and RESERVE 25 offer different dimple heights and compressive strength classes. Selection considers the planting, load from upper layers, water storage requirements and roof drainage conditions together.

The number 20 or 25 in the product name does not describe its full performance. Specifying the compressive strength class alongside the series name in a quotation enables a meaningful comparison.

Product selection can be discussed using the roof section and technical specification. The suitability of the roof’s load-bearing structure must be assessed by the project engineer.

Compare RESERVE ranges
Does water storage remove the need for irrigation?

Water stored in a drainage sheet contributes to green roof water management. Irrigation needs depend on plant species, growing medium, climate and seasonal conditions.

The sheet’s storage volume is not the same as the amount of water that is available to plants at all times. Assess water storage capacity together with the planting and maintenance plan when selecting a product.

Quotations and ordering

How should I compare quotations for green roof products?

Compare quotations for the same application area, product scope and technical properties. Material types, dimensions and quantities should be stated separately for the drainage sheet, filter geotextile, protection fleece and root barrier.

Compare the drainage sheet’s water storage, drainage under load and compressive properties using the technical documents. Check the test conditions under which the values were obtained.

For filter and protection geotextiles, ask for the quotation to state explicitly whether they are PP (polypropylene) and specify their mass per unit area (g/m²). The raw material affects chemical resistance in the service environment. Geotextiles with the same mass per unit area can differ in material and performance.

For the filter geotextile, assess water permeability and opening size. For the protection fleece, assess puncture resistance and compatibility with the waterproofing. Compare each layer according to its role in the system.

For the root barrier, compare both thickness (mm) and mass per unit area (g/m²). Consider these values alongside material type, technical documents demonstrating root resistance and project requirements.

When assessing price per square metre, account for overlaps, cutting allowances, pack quantities and the transport scope. Base the comparison on the total material required for the same application area.

View product information and the technical data sheet
Is it enough to order material equal to the roof area?

The net green roof area and order quantity may differ. Overlaps, cuts, edge upstands and pack dimensions affect the quantity required.

The SNTGREEN Project Assistant shows approximate material requirements and whole-roll quantities for the products included in its calculation. Its consumption factors already include overlap; do not add the same allowance twice.

Check the project plan, cutting layout, edge upstands and additional waste before confirming the order quantity.

Estimate material requirements
What information should I prepare for product selection and a quotation?

A roof plan, the area to be planted, planting preferences and any technical specification are a useful starting point. Roof slope, upper layers and design loads help assess product selection.

Providing the delivery location and required date alongside the product and quantity helps with quotation and dispatch discussions. Identify any details that are still undecided during the discussion.

Discuss your project

Technical support

Can I obtain a sample and technical information before ordering?

SINTAR offers samples and technical discussions to support product selection. Current technical data sheets are available on the relevant product pages.

Include the product name and intended application in your request so the discussion concerns the correct product. A sample helps you examine its structure; technical suitability is assessed using product documentation and project conditions.

Contact us for samples and technical information

Ask your question

If you cannot find an answer here, send us your question and email address.

Submitted questions are not published automatically. After review, answers may be added to the FAQ.

Your email address may be used to contact you about your question. It will not be published in the FAQ.

Do not include personal or confidential information in your question.

0 / 2000

Checking submission availability…

Let’s discuss your green roof project.

Contact us