PROJECT ASSISTANT

Estimate your material requirements.

Enter the area to be planted to see the estimated material areas and full rolls included in the calculation.

Your project

Enter the area to be planted and select the drainage sheet.

Only the horizontal area to be planted. Exclude gravel and walkways.

20 mm · 2 × 20 m/roll

Approximate quantities are calculated for all RESERVE 20 and RESERVE 25 variants. Product selection must consider roof loads, falls and the drainage plan.

Fixed layers included

  • Root barrier · 400 g/m²
  • Protection fleece · 500 g/m²
  • System filter · 100 g/m²

These layer selections must be checked for the project. System weight and water storage capacity are not calculated.

Your material requirements

Overlap is the portion where adjoining materials cover each other. It is included in the calculated requirements.

Enter a valid area to view the material list.

This calculation estimates material requirements. Overlaps are included and each material is rounded up to full rolls. Cutting, edge upturns and additional waste are excluded. Confirm final order quantities against the project.

HOW ARE QUANTITIES CALCULATED?

Select an included layer to see how its area converts to full rolls.

1234567

Schematic cross-section; thicknesses are not to scale. Growing medium and vegetation are shown but their quantities are not calculated.

Actual surface detail of the SNTGREEN RESERVE drainage and water storage sheet

Enter a valid area for calculation details. You can still explore the layers in the cross-section.

Detailed quantities and roll dimensions

Enter a valid area to see detailed quantities.

How is it calculated?

1. Requirement including overlap: net planted area × the product consumption factor. The same net area is assumed for all four included layers.

2. Number of full rolls: requirement including overlap ÷ roll area; round up to the next whole number.

3. Area to order: number of full rolls × roll area. Surplus area = area ordered − requirement including overlap.

Each material uses its defined consumption factor. This estimate assumes an 8 cm overlap and a factor of 1.04 for every RESERVE variant. No second overlap allowance is added.

Let’s discuss your green roof project.

Contact us