INSTALLATION NOTE

How high should growing medium come at a parapet?

A parapet is the low wall at the roof edge. Do not raise the growing medium high enough to cover the waterproofing termination on the wall.

Coordinate the finished growing-medium level, waterproofing upstand and upper termination. The required height is specified in the selected roof detail.

Installation tip

Check against the finished growing-medium or paving level, not the bare structural deck.

At the parapet

The root barrier and protection fleece turn up the wall; a gravel strip separates the planted area.

At the parapet — schematic section of the system shown in the SNTGREEN videoAbove the waterproofing: root barrier, protection fleece, RESERVE with cup openings upwards, filter, growing medium and planting. RESERVE ends in the planted area. The L-profile rests on the protection fleece with its foot towards the gravel. The upper blue arrow shows the general direction of excess water; the arrow at the profile shows the open passage. Cups store water; flow does not pass through their walls. Not a scaled construction drawing.Planted areaGeneral direction of excess waterCups store water; excess flows through the paths between them.1234
PlantingGrowing mediumFilter fleeceSNTGREEN RESERVEProtection fleece · 500 g/m²Root barrier · 400 g/m²Waterproofing

Based on the SNTGREEN installation example in the video. This schematic is not to scale and does not prescribe one solution for every roof. The 8 cm flat edge at the RESERVE joint is not shown in this termination section. Upstands, water passages, fixings, fire and waterproofing details must be completed using current product instructions and the roof design.

Waterproofing upstand

Waterproofing continues up the vertical surface. Its upper termination is protected according to the design detail for the selected waterproofing system; other layers do not replace this watertight connection.

Watch the installation video →

Let’s discuss your green roof project.

Contact us