INSTALLATION NOTE

Which joint at the roof outlet is most critical?

The connection between the outlet and waterproofing. Drainage material and gravel above cannot resolve a leak at that joint.

The outlet type and waterproofing material must be compatible. Use the connection method specified for the waterproofing system.

Installation tip

Complete the connection inspection before laying upper layers.

Around the roof outlet

Water from the gravel strip must reach the outlet, and the inspection lid must remain accessible.

Around the roof outlet — schematic section of the system shown in the SNTGREEN videoAbove the waterproofing: root barrier, protection fleece, RESERVE with cup openings upwards, filter, growing medium and planting. RESERVE ends in the planted area. The L-profile rests on the protection fleece with its foot towards the gravel. The upper blue arrow shows the general direction of excess water; the arrow at the profile shows the open passage. Cups store water; flow does not pass through their walls. Not a scaled construction drawing.Planted areaGeneral direction of excess waterCups store water; excess flows through the paths between them.1234
PlantingGrowing mediumFilter fleeceSNTGREEN RESERVEProtection fleece · 500 g/m²Root barrier · 400 g/m²Waterproofing

Based on the SNTGREEN installation example in the video. This schematic is not to scale and does not prescribe one solution for every roof. The 8 cm flat edge at the RESERVE joint is not shown in this termination section. Upstands, water passages, fixings, fire and waterproofing details must be completed using current product instructions and the roof design.

Accessible inspection chamber

Do not cover the lid with growing medium. Leave access for cleaning the outlet and checking its connection.

Watch the installation video →

Let’s discuss your green roof project.

Contact us